游艇索具中的复合材料

振动不是游艇上的新问题，并且主要是由于索具。复合电缆由于其长度的重量低而容易受到振动的影响，而电缆振动是另一个潜在问题的迹象。然而，如果无法识别来源，则使用将来的纤维保持安静是电缆振动抑制的理想技术。本文讨论了安装安静的步骤以减少电缆振动。

Positioning the Stay Quiet on the Cable

The vibration of the cable is monitored and/or filmed in order to identify the points of maximum vibration (A) and nodes, i.e., transition between vibration waves (B). There can be one or more waves based on the length and diameter of the cable. It is essential to position the Stay Quiet at the points of maximum vibration (A) on the top or the bottom wave, based on whether the vibration is transmitted above or below the stay, for instance, into the hull or into the mast.

Installation Components and Equipment

The following are the components to be used for installation:

• A -1 x保持安静
• B - 1 x cable clamp
• C - 4 x external clip - small
• D - 1 x external clip - large

以下是安装的其他内容：

• 1 x bosun 's chair with strop
• 1 x PVC胶带

安装步骤

1. 内部夹具住宿- 将夹具夹在静止状态上，并在上方和下方施加PVC胶带，以防止其滑动。
2. Stay Quiet over clamp– The Stay Quiet is carefully opened at the top and slipped around the cable. The Stay Quiet is then gradually worked down to feed it over the cable and clamp. It is necessary to ensure that the center of the Stay Quiet is located directly over the cable clamp.
3. Attach the external clips- 然后将五个外部塑料夹轻轻打开并放在凹陷上安静。

If vibration is not totally eliminated, the position of the Stay Quiet on the cable is adjusted to optimize dampening effect. If vibration is still there, then it can be reduced by adding another Stay Quiet onto a secondary node.

This information has been sourced, reviewed and adapted from materials provided by Future Fibres.

For more information on this source, please visit未来的纤维。