Olympus’ new DC series (DC1–DC5) dual element transducers provide inspectors with a complete corrosion monitoring toolbox for pipeline and tank integrity. Optimized for corrosion and thin materials, the transducers work with the NDT instruments and ultrasonic inspection procedures used in the oil & gas, energy and mining industries.
Versatile transducers go beyond corrosion monitoring to include pipe weld testing. Image Credit: Olympus Scientific Solutions Americas NDT
Depending on the application, any one or a combination of these five transducers offers improved corrosion monitoring and defect sizing. As field inspections change, inspectors can benefit from having the complete set of transducers with a total combined thickness range of 0–2 in. (0–50.8 mm), as well as the extra pipe weld inspection tool with the DC3 model.
Cleaner Signals
All models provide a cleaner signal than single element transducers and offer less ring down than comparable models—helpful for resolving smaller defects, inspecting close to the surface and differentiating between two indications.
袖珍的
由于低调的设计和小尖端直径（DC1和DC2型号）以及集成的楔子（DC3），检查了难以访问的区域，例如锅炉管。
Versatile
The DC3 model takes the series beyond corrosion monitoring and thickness measurement to include pipe weld testing and other thin-wall material inspections. Fast and reliable, the transducer performs high-speed manual weld inspections similar to comparable models.
Cost-effective
具有厚壁的耐磨损外壳（DC2型号）和可更换的楔子（DC4和DC5），换能器可持续使用。DC1和DC2型号上的耐热延迟线最高为150°C（300°F），有助于减少维持时间的维护时间，以增加温度的管道和储罐检查。
Efficient
Pairing the transducers with the Olympus EPOCH™650 or 6LT flaw detectors or the 38DL PLUS™thickness gauge* enables accurate, efficient corrosion mapping.
For more information about the DC series dual element transducers and other industrial solutions, visit:Olympus-ims.com。
来源：https://www.olympus-ims.com/en/