由Panacol开发，结构®5801是一种新的2组分粘附系统，在加速衰老后表现出异常的化学和水分耐药性。这种阻力使结构化®5801 an ideal material for the structural bonding and potting of electronic components that require the highest level of environmental protection.
Structalit®5801被用作盆栽，以保护外壳中的印刷电路板。图片来源：Panacol-Elosol GmbH
Structalit®5801 is a black, 2-component epoxy adhesive system with a simple 2:1 mixing ratio. Curing takes place within 12 hours at room temperature. For faster processing, this adhesive can also be cured thermally, in as little as 30 minutes at a moderate temperature of 80 °C. Lower temperature curing minimizes thermal stress on components, and the shorter cycle time improves productivity. This medium-viscosity adhesive blend has excellent adhesion to metals including aluminum and stainless steel. It is well suited for the structural bonding of metal frames and housings. Structalit®5801还表现出非常好的对塑料的粘附，例如PA6 GF或PBT。这种多底物粘附允许结构®5801用于通常在消费者和汽车电子行业中发现的许多材料组合。
这种新开发的粘附疗法的收缩率低，并且由于其高粘结强度和统一特性而表现出良好的振动和电阻性。在高于130°C的温度下的老化测试期间，结构®5801 actually gains bond strength. Adhesive exposure to transmission oil, biodiesel, and alcohol during aging resulted in minimal loss of bond strength. This is mainly due to the high degree of crosslinking and the low moisture absorption of this adhesive.
Structalit®5801可以从50毫升双室墨盒中分配，这是手动，短运行或半自动产生的理想选择。这种环氧系统也可以在沉积稳定的散装容器中使用，可与仪表混合设备一起用于大量生产。2020欧洲杯下注官网
Source:https://www.panacol.com/